微喷带说明

Micro jet descriptions

 

Deviation wall thickness allowed 10% or less, plus or minus 0.3 mm inner diameter, hole spacing 10% or less, aperture 5% or less. 

This product conforms to the zhejiang province enterprise product standards, for the record registration certificate number: 331081 b207-138 

Specification size, hole size and wall thickness, hole, hole spacing, double layer can be customized according to customer's requirement. 


 

Optimal Characteristics 

1、labor saving, easy to use 

And utilization of the water pump, medicine, fertilizer, and organic connected to a piece of gardens, instead of the usual artificial irrigation, fertilizer, pesticide, greatly reduce the labor burden of farmers friend, can make the amount of labor per acre reduced by 80%. 

2、 reduce fertilizer loss, increase production 

Use this product for irrigation fertilization (soluble fertilizer) due to the fertilizer concentration, not easily lost, and uniform spraying, promote good growth of crops, all can improve crop yield per unit area by 20%, save up to 50% fertilizer. 

3、 is the production of pollution-free green food 

Due to the use of drip irrigation belt is under mulch pesticide applying fertilizer, reducing fertilizer, medicine, direct contact with fruits and vegetables to produce spotlessness, not contaminated, became the ideal green food consumers. 

4、 save energy and reduce cost 

Due to the effective use of water and fertilizer, medicine (section water 80%, fat 50%, 50%), and therefore can be energy efficient, and irrigation uniformity within 60 meters, less subject to regional restriction. (applicable to the slope, the ground) 


 

Method Application

1, before laying pouring belt, should use drug first get rid of pests (such as mole, etc.) in the soil in case they harm crops, biting into spray zone. 

2, laying, should bring micro spray irrigation hole Kong Chao, tail block. With a backlog of pump suction. Water inlet wrapped in gauze (mesh), prevent the hole plugging. In case of congestion, but will end, a minutes, wash with water, also can use the hand gently pat wall and other tools. 

3, in use for the first time, according to your pump pressure, micro injection with working length, switch on (tee, four-way) first, it's best to open several switch, prevent stress caused by micro spray with blasting. If the pressure is not enough to turn off a few switch. Next time use how open the switch. If, after that try a piece of good moisture change out a piece of open the switch first, then try to turn off all good that a switch, to prevent improper use of blasting. 

4, when the alternate husbandry, first take the micro spray water pumping extrusion roll, wash, and put the shade, prevent the mouse biting and other things, arrange another time to use again. 

5, (1) did not use money, found no holes or mechanical damage, the manufacturer to real change. 

(2) (a production season) during use in seam straight crack, the manufacturer to real change. 

(3) use undeserved exceed the rated working pressure, blasting, the manufacturer not to exchange. 


 

Scope Application 

A line, shallow root planted crops (strawberry, tomato, broccoli, celery, tomatoes, vegetables, etc.) 

B, deep root planted crops (watermelon, muskmelon using grapes,, zucchini, peppers, etc.) 

C, perennial plant crops, tobacco, asparagus, lily flower, papaya, bananas, etc.) 

D, edible fungus, cotton, nursery, flower, field crops, desert afforestation 

E, suitable for greenhouse crop cultivation 




栏目导航

微喷带│滴灌带│农用喷灌带 温岭市农丰软管有限公司
联系人:郑先生
电 话:0576-86672723
手 机:13575866302
传 真:0576-86672883
Email:info@cnnfrg.com
地 址:浙江省温岭市松门淋川工业区
邮 编:310018
网 址:http://www.cnnfrg.com
技术支持:台州赛诺·360台州服务中心